|
 |
 |
|
|
|
|
|
REFERENCE SERIES
|
|
|
 |
The brand new RXW Reference 12” sub is more than 2dB more efficient that the previous models,
and even plays lower in sealed enclosures. The
much improved and better looking RXW is very
versatile and can work in all types of enclosures... |
|
|
FEATURES
• Dual 4-Ohm 2.5” Voice Coil
• TPX Honeycomb Cone
• Backed by one year manufacturer waranty
• High-Roll Foam Surround
• Concealing Gasket/Trim Ring
• Spoked Stiffening Sub-Cone
|
 |
| REFERENCE |
RXW-12 |
RF-8W |
| RMS Power |
600 |
180 |
| Effiriency (1/1m dB) |
89.90 |
83dB |
| Voice Coil Configuration |
2" Dual 4Ω |
2" Dual 4Ω |
| Mounting Depth |
6.875" |
4" |
| Optimum Sealed ft³ |
1.00 |
0.60 |
| Optimum Ported ft³ |
2.50 |
0.75 |
|
Most of today’s car audio products consist of several custom tooled parts,
all which cost extra money. The design goal for RF-8W was to engineer
a phenomenal audiophile-grade subwoofer that did not cost a fortune. If you're looking for chrome or something really
flashy,
look somewhere else. If you're all about performance, look no further.
We used simple, classic materials for the best sound quality;
non-pressed pulp paper cones, foam surrounds, and Conex
suspension.
RF-8W is also a great fit in a factory 8” subwoofer location... |
|
 |
Reference woofers…
Designed with the audiophile in
mind. Perfected to a high tolerance
of fit and finish, these woofers
are engineered to produce accurate,
uncolored bass. Dual 2.5 4 Ohm
voice coils wound on aluminum
formers keep the moving assembly
cool while taking the power you
throw at ‘em. The 1-piece
rubber gasket/ surround and the
Nomex spider keep everything aligned
and straight to make sure you
only hear what you’re supposed
to.
Treat yourself to an audition
of the Reference subwoofers today… |
FEATURES
•
Cast Aluminum Basket
• Aluminum Voice Coil Former
• Hand Laid Paper Pulp Cone
• High Roll Rubber Surround
• Backed by one year manufacturer waranty
• Polypropylene Injection
Dust Cap
• Vented Back Plate
• Suspension Integrated Tinsel
Leads
• Nickel Plated 8 ga. Compression
Wire Terminal
|
|
| T/S
Specs |
RW-10 |
RW-12 |
| Fs
(hz) |
25.94 |
24.75 |
| Qms |
4.300 |
3.905 |
| Vas
(ft³) |
0.962 |
2.067 |
| Cms
(mm/n) |
0.176 |
0.156 |
| Mms
(g) |
213.9 |
265.2 |
| Rms
(kg/s) |
8.107 |
10.550 |
| Xmax
(mm) |
14.00 |
14.00 |
| Xmech
(mm) |
21.00 |
21.00 |
| Dia
(in²) |
8.072 |
10.070 |
| Sd
(in²) |
51.16 |
79.78 |
| Vd
(ft³) |
0.025 |
0.038 |
| Qes |
0.463 |
0.536 |
| Re
(Ohm) |
6.67 |
6.67 |
| Z
(Ohm) |
8 |
8 |
| BL
(Gauss) |
22.4 |
22.65 |
| Pe
(watts) |
500 |
600 |
| Qts |
0.418 |
0.467 |
| NO |
0.099 |
0.161 |
| 1w/1m
SPL (dB) |
82.10 |
84.23 |
| 2.8v
SPL (dB) |
82.90 |
85.01 |
| VC
Dia. (in) |
2.5 |
2.5 |
| Impedance
(Ohm) |
DVC 4 |
DVC 4 |
| M-vd
(ft³) |
0.0800 |
0.1000 |
| |
| Measurements
(in) |
RW-10 |
RW-12 |
| Overall
Diameter |
10.75 |
12.375 |
| Overall
Height |
6.875 |
7.375 |
| Mounting
Depth |
6 |
6.5 |
| Cutout
Diameter |
9.25 |
11 |
| Motor
Diameter |
8.125 |
7.25 |
| Motor
Height |
2.75 |
2.75 |
| Flange
Width |
0.625 |
0.625 |
| Flange
Height |
0.5 |
0.5 |
| |
|
|
|
| Sealed
Box |
RW-10 |
RW-12 |
| Min.
Sealed (ft³) |
0.50 |
0.75 |
| Qtc |
0.570 |
0.690 |
| F3
(Hz) |
57.00 |
48.80 |
| Opt.
Sealed (ft³) |
0.75 |
1.00 |
| Qtc |
0.510 |
0.630 |
| F3
(Hz) |
58.10 |
48.10 |
| Max.
Sealed (ft³) |
1.00 |
1.50 |
| Qtc |
0.480 |
0.560 |
| F3
(Hz) |
58.90 |
48.30 |
| |
| Ported
Box |
RW-10 |
RW-12 |
| Min.
Vented (ft³) |
1.25 |
2.00 |
| Port
(dia. x length) |
3x9 |
4x14 |
| Fb
(Hz) |
39.10 |
34.20 |
| F3
(Hz) |
31.80 |
29.10 |
| Opt.
Vented (ft³) |
1.50 |
2.50 |
| Port
(dia. x length) |
4x17.5 |
(2)3x16 |
| Fb
(Hz) |
36.70 |
31.00 |
| F3
(Hz) |
30.10 |
26.40 |
| Max.
Vented (ft³) |
1.75 |
3.00 |
| Port
(dia. x length) |
4x16.5 |
(2)3x15 |
| Fb
(Hz) |
34.20 |
27.80 |
| F3
(Hz) |
28.20 |
23.70 |
|
|
|
|
